Whirlpool washer error F0E5
F0E5 means the washer has detected an out-of-balance load.
Also shows as F0 E5
Symptom
F0E5
Free checks
8 checks
Then the part
Load lying unevenly in the basket
The 8 free checks
Start at the top. Unplug the machine first.
- 01
Check whether the load is actually dripping wet. If it is not, the cycle finished as intended and only took longer while balancing — nothing needs doing.
- 02
Cancel the cycle by pressing Start or unplugging the washer.
- 03
Run a drain-only cycle if water remains in the tub.
- 04
Rearrange or remove items so the load sits level and is not overloaded.
- 05
Use the Bulky or Heavy Duty cycle for a large load.
- 06
If the wash has finished and only water needs spinning out, rearrange the load and run Drain and Spin.
- 07
Balance a single bulky item with a few extra garments, then run Drain and Spin.
- 08
Redistribute the load inside the spin basket, then, if the code returns, check the suspension rods and springs — they are replaced as a set of four.
What causes it
Listed most likely first.
| Cause | How often | DIY |
|---|---|---|
| Load lying unevenly in the basket | Most common | Yes |
| Load too large for the basket | Common | Yes |
| A single bulky item washed on its own, such as a rug or a denim jacket | Common | Yes |
| A suspension rod or spring is broken or damaged | Occasional | Call a pro |
Differences by model
| Series | What differs |
|---|---|
| Top load HE | The guidance this page cross-references is written for top-load HE washers. |