Whirlpool dryer error F3E2
F3E2 means the dryer completed five loads in a row without its moisture sensor registering any data.
Also shows as F3 E2
Symptom
F3E2
Free checks
5 checks
Most likely cause
Dryer is not level, so laundry does not consistently touch the moisture sensor bars
The 5 free checks
Start at the top. Unplug the machine first.
- 01
Press Power to clear the code and restart the dryer.
- 02
Check that the dryer is level — measuring from the cabinet edge if the top is curved — and adjust the leveling feet.
- 03
Dry a full-size load instead of a very small one or single item, or use an Automatic cycle instead of Timed Dry.
- 04
Clean any residue off the moisture sensor strips inside the dryer drum.
- 05
With the dryer unplugged, check the wire harness between the moisture sensor and the control board for loose or damaged connections.
What causes it
Listed most likely first.
| Cause | How often | DIY |
|---|---|---|
| Dryer is not level, so laundry does not consistently touch the moisture sensor bars | Most common | Yes |
| A very small load or single item does not make contact with the moisture sensor bars | Common | Yes |
| Moisture sensor bars dirty, or shorted by a metal object | Occasional | Yes |
| Moisture sensor wire harness loose or damaged | Occasional | Yes |
| Electronic control board | Rare | Call a pro |
If none of that fixed it
If F3E2 persists after these checks, call for service.